🎮 Bossy: Bill of Materials
Items used
| # | Item |
|---|---|
| 1x | Arduino Micro micro controller or similar |
| 2x | CD74HC4067 Mux Breakout like Sparkfun 16-channel Analog/Digital MUX Breakout - CD74HC4067 |
| 1x | nrf24l01 breakout board |
| 1x | LED DOT MATRIX BL-M12X883 XX, HT16K33 driver like Adafruit Bicolor 8x8 LED Matrix with I2C backpack |
| 4x | 2-axis thumb joystick like Adafruit Thumb Joystick breakout board with select buttons |
| 1x | Mini breadboard |
| 1x | Capacitor 1500uF |
| 5x | Potentiometers (10k, 20k, 50k ohms work well) |
| 12x | Resistors 1/4 watt, (10kohms works well) |
| 4x | Momentary push buttons |
| 2x | PC401 proto board (14 cm x 10 cm) |
| 2x | On-On SPDT Switch |
| 2x | On-Off-On SPDT Switch |
| - | Wires AWG - red, blue, etc |
| - | Male and female pin headers |
| - | Powerbank + USB cable |
| - | Standoffs, screws, hex, and nuts for enclosure |
| - | Lasercut acrylic for enclosure |
I found some really cheap and affordable alternatives to Adafruit and Sparkfun breakout boards. These are manufactured and shipped from China.
Receiver
- 1x - Arduino Micro
- 1x - nrf24l01 breakout board
Tools
- Solder
- Soldering Iron
- Breadboards
- Wire stripper
- Desoldering Pump
Makeshift Multimeter
(for Continuity / Connectivity testing and analog sensor testing)
- Adafruit Metro Mini
- Mini breadboard
- Jumper Wires
- Resistor
Power source
For you to get an idea of the costs of each item, here’s some screenshots of some possible parts for this project the prices are in Philippine Peso, items are shipped from China to the Philippines. Take note that some of them are sets of 5 or 100 even though you only need a few. Right click and select ‘view image’ to see the prices.
 |
 |
 |
|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
- |